Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Sziklai pair connection

Status
Not open for further replies.
A

amriths04

Full Member level 5
Full Member level 5
Joined
Jul 15, 2006
Messages
263
Helped
23
Reputation
46
Reaction score
9
Trophy points
1,298
Activity points
2,819
dear friends,
we all know that when the emitter of the 1st transistor is connected to the base of the 2nd, the 2 transistors together acts as a current booster(darlington). will it also be correct if the collector of the 1st transistor is connected to the base of the 2nd? is there anything wrong?

thank you in advance,
AMRITH.S.
 

darlington

Google "Sziklai" and "Sziklai pair".
 

    A

    amriths04

    Points: 2
    Helpful Answer Positive Rating
Re: darlington

You can very well use it. But it is not a darlington connection, since the nice thing about darlington is that it gives you another 3 terminal device which acts like a bipolar transistor of higher beta. and double Vbe.
If you use the collector to connect to the base of the next it is effectively having a 2 stage circuit, and you may have problems in frequency response of the circuit by creating a pole at the base because of the really high impedance at that node.
Also the transistor pair cannot be similar type 1 will be npn and thee other will be pnp.
 

Re: darlington

You can use 2 transistors connected the C pin of the 1st to the B of tne 2nd. But this circuit using 2 different transistors, one is pnp, and one is npn.
Then, the E pin of the 1st is connected to C pin of the 2nd.

I never heard about the name of the circuit, but it behaves just like the first transistor, and the second is the current booster/hfe booster.

nguyennam
 

Re: darlington

nguyennam said:
You can use 2 transistors connected the C pin of the 1st to the B of tne 2nd. But this circuit using 2 different transistors, one is pnp, and one is npn.
Then, the E pin of the 1st is connected to C pin of the 2nd.

I never heard about the name of the circuit, but it behaves just like the first transistor, and the second is the current booster/hfe booster.

nguyennam
Click to expand...
The name is "Sziklai pair", or "complementary Darlington", or "compound Darlington". It has near-unity gain like the Darlington, but, due to the feedback, the low-frequency output impedance is lower, and it can have bandwidth and stability issues.
 

Re: darlington

Thank you 10kangstroms,

I love this circuit and have used it very commonly, while rarely use a Darlington circuit, but never know its name.

nguyennam
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top