Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

lengthen for usb cable

Status
Not open for further replies.

timo67

Member level 4
Member level 4
Joined
Sep 21, 2006
Messages
68
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Activity points
1,665
does any know how to make lengthen for cable usb ? more than 10 meter
 

Buy a extension cable from any PC store.

nguyennam
 

Use USB Hub to inter-connect segmented cables
 

There is a very simple solution: bring your PC and run 10 meters everytime you need use USB.

Just for fun and relax. But in my opinion, there is nothing to think much this case.

nguyennam
 

Q3: How far away from a PC can I put a USB device?
A3: With the maximum of 5 hubs connected with 5m cables and a 5m cable going to your full speed device, this will give you 30m of cable (see section 7.1.19 for details). With a low speed device, you will be able to get a range up to 27m, depending on how long the device's cable is. With a straightforward cable route, you will probably be able to reach out 25m or so from the PC.

More info at:
https://www.usb.org/about/faq/ans5/

Regards,
IanP
 

    timo67

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top