Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

El cheapo PIC programmer

Status
Not open for further replies.
B

bbgil

Full Member level 2
Full Member level 2
Joined
Mar 11, 2006
Messages
135
Helped
13
Reputation
26
Reaction score
9
Trophy points
1,298
Activity points
2,321
i am trying to build this el cheapo pic programmer by myke predko. i just want to know if anybody has use this before, and what are there comments? also if there are any links on the software support for this programmer. thanks in advance
 

yes i have made it and it works fine.. just follow everything down to book and you shall get it...
 

it works but you might as well try the PPWIN programmer though

heres the files
 
  • Like
Reactions: harisafp

    B

    bbgil

    Points: 2
    Helpful Answer Positive Rating
    H

    harisafp

    Points: 2
    Helpful Answer Positive Rating
leinathan,
thanks for the circuit attachment. BTW, what about the software support for this one, can i use ICprog for this or do i need to use another one? if i can't use ICprog, any links on the software? also what PIC series can it support? thanks again, kabayan.
 

hi. i was able to make this work with ICprog but only with the 16f84a. i tried using 16f877a, no luck. any help is appreciated. still getting verify error at 0x00. thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top