Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Elevator system's floor sensor selection

Status
Not open for further replies.
Ramesh_maharjan

Ramesh_maharjan

Member level 2
Member level 2
Joined
May 19, 2006
Messages
50
Helped
7
Reputation
14
Reaction score
0
Trophy points
1,286
Activity points
1,553
elevator floor sensors

Which sensor will be suitable for the floor sensor of an elevator. Is is effective and reliable to use limit OR reed switch.
there is also possibility of using magnetic binary sensor but i don't know much about them.
Help me to solve this problem in sensor selection
 

sensors in elevator system

Why don't you use a photodiode instead.It's worth a try .Anyway your project is fabulous and very exciting
 
photo diode is not used because it is sensitive to light& temp. i.e it is effected by ambient
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top