Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what function do the five serial transistors act as ?

Status
Not open for further replies.
S

samuel

Full Member level 3
Full Member level 3
Joined
Nov 15, 2004
Messages
171
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Location
world
Activity points
1,143
Note: (1)serial transistors have same length .
(2)their gates are connected together.
(3)the last Nmos transistor drain is connected to gate

thanks.


samuel.
 

in some case association of transistors in series improve matching when designing a current mirror with big mirroring factor.

For instance imagine you must create a current 9 time the input one. Then you connect 3 MOs as you described with the gate connected to the gate of 3 MOS connected in parallel. In that case you can see that the ideal mirroring factor is 9.

As the chrerry on the cake, you get that the area of both elements of the mirror have the same effective surface, then optimizing matching.
 

it is a simple diode. maybe the lenght of the overall transistor is to large for the drc. I had some problems once time and ahd also to split it into shorter ones and connected in series. the interesting was that it was noit realy a design rule violation, it was only give because the transistor simulation model was not modeld for so long mosts and so the implemented such a rule, to split it.
 

    S

    samuel

    Points: 2
    Helpful Answer Positive Rating
thanks, eda4you

i feel that its answer is ok.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top