Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

5-to-32 line decoder with 3 to 8 line decoder

Status
Not open for further replies.

fm_com_28

Full Member level 1
Full Member level 1
Joined
Feb 2, 2006
Messages
99
Helped
11
Reputation
22
Reaction score
7
Trophy points
1,288
Location
Fayoum, Egypt
Activity points
1,916
5 to 32 decoder

Dear,
I want to construct a 5-to-32 line decoder with four 3-ro-8 line decoders with enable and a 2-to-4 line decoder.
 

5 32 decoder

you have 5 input lines and you need output lines

now let lines are
d0 lsb
d1
d2
d3
d4 msb

connect d3 and d4 to 2-to-4 line decoder
connect d0, d1, and d2 to all 3-to-8 line decoders.

Now connect output of 2-to-4 line decoder to enable pins of 3-to-8 line decoders such that the first output makes first 3-to-8 line decoders enable.

thats it 32 output of 3-to-8 line decoders are your required output

again try your self and if u need schematic just post in here.
don't forget to press help me button if this was helpful.
 
5-to-32 decoder

my friend if we don't put any inverters is it still right?
 

5*32 decoder

nikhilele said:
here is the schematic
nikhilele, your circuit will not work! ABC lines of bottom 3 ICs are not connected! and last IC has no connection at all !

Here is the corrected schematic. You can also use inverter (7404) instead of AND gate with last IC. In that case connect D3 to G1 and inverted D4 to G2A.

EDIT: Ohh I didn't notice this thread is almost 3 year old!! anyways :D
 
1 of 32 decoder

Sir, how will I extend this to make a 10 to 1024 decoder? will using 4 to 16 decoders be feasible?
 
  • Like
Reactions: thlong

    thlong

    Points: 2
    Helpful Answer Positive Rating
5-to-32 line decoder

cerberus_14 said:
Sir, how will I extend this to make a 10 to 1024 decoder? will using 4 to 16 decoders be feasible?
I would suggest use a CPLD or FPGA for it rather than discrete ICs
 

6-to-64 line decoder

hi cmos! how about a 6 to 64 decoder?? thanks!
 

5 bit decoder

hyuugapatik said:
hi cmos! how about a 6 to 64 decoder?? thanks!
Its doable. You'll need 16 of them. But I haven't seen any discrete 6 to 64 decoder IC!
 

2 to 4 decoder to 3 to 8 with enable

fm_com_28 said:
Dear,
I want to construct a 5-to-32 line decoder with four 3-ro-8 line decoders with enable and a 2-to-4 line decoder.
 

5:32 decoder

pz help me in constructing a 5-32 bit decoder using NAND or NOR gate.

Plz help
 

6 to 64 line decoder

mtechvlsi said:
pz help me in constructing a 5-32 bit decoder using NAND or NOR gate.

Plz help

This is how you implement it. Quite easy, isn't it? :D
 
line decoder

yeah thanks buddy, i was implementing it through using 2-4 and 3-8 decoders.
i will be needing ur help again if u cud help me in designin 5-32 bit decoder in NOR logic.
 

5-to-32 decoder mosfet

mtechvlsi said:
i was implementing it through using 2-4 and 3-8 decoders.
Thats what I have done.

Here is the implementation using NOR gates.

Click "Helped Me" button if you find the replies helpful.
 
32 line decoder

1st of all thank u, u r rite but i was deployin 4 3-8 decodern n 1 2-4 deocder.
i wanted to ask again if the ip lines 4m 3-8 decoder at the end of above box r to connected elsewhere also? same in 2nd box?
 

3 to 8 line decoder

No they are just the inputs. Not connected anywhere else. E is MSB, A is LSB.
Since its matrix connection, you only need one 3-8 and one 2-4 decoder.

Please do not use SMS/Text type language here (ip = input, 4m = from). Its hard to read it.
 

decoder5*32




My project is CMOS 6T SRAM Implementation in different technology for SNM ,DRV,RM & WM Analysis.

Frist i have to do READ & WRITE operation means i want to do calculate of Cell Ratio & PULL-UP Ratio. Then I want to do analysis of SNM ,DRV ,WM & RM .So please send me reponse as soon as possible that How will i do this project & also Circuit diagram.I am confused in input & Output of this circuit.plz response me.
 
  • Like
Reactions: thlong

    thlong

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
Tcam

can any one give me a simple circuit of tcam cell with its prechage ckt and sense amplifier as i need to stimulate one tcam cell.Its very urgent and necessary.Plz give response as soon as possible.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top