Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me build a battery charger: 6-24V and up to 1200mAmps

Status
Not open for further replies.
mtkee2003

mtkee2003

Full Member level 2
Full Member level 2
Joined
Sep 24, 2005
Messages
132
Helped
4
Reputation
10
Reaction score
1
Trophy points
1,298
Activity points
2,356
hi
i want to produce a Battery charger. it must work from 6 volts up to 24 volts an up to 1200mAmps. also it must have a thermal protection.

regards. Mostafa
 

Re: Battery Charger

mtkee2003 said:
hi
i want to produce a Battery charger. it must work from 6 volts up to 24 volts an up to 1200mAmps. also it must have a thermal protection.

regards. Mostafa
Click to expand...

Why do you try this web ???
www.discovercircuits.com
There are many and many circuits for U (reference).
Good luck for U !
 

    mtkee2003

    mtkee2003

    Points: 2
    Helpful Answer Positive Rating
Re: Battery Charger

Hi,
What type of battery do you need to charge.
Do you need a switching reglator based charger or a linear regulator based.
One more which does charging in burst mode.

You could get a basic block digram for the circuit architecture from the Linear techonologies web site.
Thermal protection is an inherant part for all these.
If you need more information please feel free to ask
 

    mtkee2003

    mtkee2003

    Points: 2
    Helpful Answer Positive Rating
Battery Charger

hi ambreesh

i need a switching reglator based charger

i found the pic16hv785 for my work. is it a good choice?

i need this output:
variable voltages: 6,12,18,24
variable current:250mA,500mA,1200mA
with only one battery charger.

what is your opinion?

with best regards, Mostafa.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top