Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Software for simulating low frequency wire

Status
Not open for further replies.
H

hapciu

Junior Member level 3
Junior Member level 3
Joined
Oct 18, 2005
Messages
25
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,283
Activity points
1,441
hi!
I have the following problem:
I have a cylinder long of 2 m, diameter 0.5 m. 1m far from this cylinder (orthogonal) I want to simulate a wire in which flows 500 A , 50Hz, in order to see the field distribution on the cylinder.
Is it possible to simulate this wire? How can I charge it in such a way to have 500A?
Is it possible with CST or HFSS, or maybe another simulator?
Some ideas?
Thanks.
Hapciu.
 

Re: CST-wire simulation!

Your frequency is quite low
why do not considera low-frequency tool?

HFSS could not be suitable for such a simulation.

SL
 
CST-wire simulation!

yes, for such very low frequency problems, you might want to consider Ansoft Maxwell or CST EM studio.

Anyway, you may want to try the frequency domain solver in CST, it might give you some results. but I never used it for such extremely low frequencies
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top