Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

can a 15nm oxide thickness hold 6.5v supply

Status
Not open for further replies.
chviswanadh

chviswanadh

Member level 5
Member level 5
Joined
May 2, 2005
Messages
93
Helped
21
Reputation
42
Reaction score
9
Trophy points
1,288
Location
Bangalore
Activity points
1,792
Hello,

Can anybody tell me whether a device with 15nm oxide thickness hold a 6.5 v supply voltage.

Thanks
chviswanadh
 

Hi,
Whether a device can handle 6.5 V or not depends on the technology and the foundry.
Means you have to check with the design files provided by the foundry to see the breakdown voltage.

Thanks
Shaikh Sarfraz
 

    chviswanadh

    chviswanadh

    Points: 2
    Helpful Answer Positive Rating
chviswanadh said:
Hello,

Can anybody tell me whether a device with 15nm oxide thickness hold a 6.5 v supply voltage.

Thanks
chviswanadh
Click to expand...

a 0.35u technology with 7.5nm oxide thickness can hold 5v supply according the technolgy file. however,when used it in 6.5v,it works too. maybe the difference is the lifetime.
 

    chviswanadh

    chviswanadh

    Points: 2
    Helpful Answer Positive Rating
2nm can withstand 1.6v. So, 8nm can withstand over 6v.
I think 15nm can hold 6.5v.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top