Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How is the S11 of an amplifier performed in ADS?

Status
Not open for further replies.
S

STOIKOV

Full Member level 4
Full Member level 4
Joined
Nov 18, 2005
Messages
236
Helped
8
Reputation
16
Reaction score
2
Trophy points
1,298
Activity points
3,083
in ADS the S11 of an amplifier is performed with or without the VDD of the circuit ?
 

Re: S11

As far as i know the S11 parameter is determined without any external supply.

Cheers
Slayer
 

    S

    STOIKOV

    Points: 2
    Helpful Answer Positive Rating
S11

S11 will generally be different between power off and power on. If you want S11 when the amplifier is active, then that's how you should simulate it.
 

    S

    STOIKOV

    Points: 2
    Helpful Answer Positive Rating
Re: S11

Hi,

Some transistor models you choose in ADS already include the set of DC biasing conditions. Hence, the S11 u get from transistor is at the biasing condition.
 

    S

    STOIKOV

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top