Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to define Vcm in pipeline AD design?

Status
Not open for further replies.
C

cloudius

Newbie level 5
Newbie level 5
Joined
Oct 18, 2005
Messages
10
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,353
vcm ota

i've read lots of pipeline A/D papers.Vcm appears oftenly in comparators ,OTA and S/H circuit schematics.
and i'v got confused at the definition and magnitude of Vcm.

Is Vcm a fixed value under certain VDD??
or Vcm should be caculated form circuit??
has Vcm relateto OTA,S/H or other blocks??

thx
 

Vcm is the common model voltage. it is a fixed value, normally, it is VDD/2
 

The VCM is common voltage only. You analyze the pipeline ADC need not care this voltage. Normally it is vdd/2, Vrefp(or vtop) = Vcm +x(normally x=0.5v). Vrefn(or Vbot) = Vcm-x(normally x=0.5v).
We can get Vcm by two resistors divide the VDD.
 

    C

    cloudius

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top