Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What are the guidelines to be followed in Rf design?

Status
Not open for further replies.
S

suga.v

Newbie level 2
Newbie level 2
Joined
Jul 22, 2006
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
Hi,

What are the guidelines to be followed in Rf design? Can anybody send the documents & Guidelines reg. RF Design.

Thanks in advance.

Regards
Suga
 

Re: Rf Design

I think razavi book for rf microelectronics is a good start
 

Rf Design

Hi,

Thanks for the reply.

But In net where could I find the guidelines? Is there any website specifically for RF design? If so Plz tell me the website.

Thanks once again.

Regards,
Suga.
 

Re: Rf Design

suga.v said:
Hi,

Thanks for the reply.

But In net where could I find the guidelines? Is there any website specifically for RF design? If so Plz tell me the website.

Thanks once again.

Regards,
Suga.
Click to expand...

just try the search tool on this BBS,you may get it here if you are lucky enoguh.
 

Re: Rf Design

The best practise in Rf design is to keep the signal trace length as short as possible, provide a proper return path for all RF signals using power/gnd planes. If the circuit is more radiating then you need to provide shielding.

Some more points...

# avoid sharp corners.
# keep signal traces and component leads as short as possible.
# inputs and outputs should be far apart, so that RF energy will not leak back from output to input. stages should line up, rather than snake around.
# decouple the RF parts of the circuit from the DC parts of the circuit.
# shield AF and IF components from RF components.

Nagaraj.
 
  • Like
Reactions: avmdi

    A

    avmdi

    Points: 2
    Helpful Answer Positive Rating
Re: Rf Design

Hi,

U told to avoid the sharp corners.

What is the advantage for using the smooth corner traces?

Pls explain me more..I'm new for Rf layout design
 

  • Like
Reactions: avmdi

    A

    avmdi

    Points: 2
    Helpful Answer Positive Rating
Rf Design

find RF microelectronics here:
 

Re: Rf Design

nagaup3 said:
The best practise in Rf design is to keep the signal trace length as short as possible, provide a proper return path for all RF signals using power/gnd planes. If the circuit is more radiating then you need to provide shielding.

Nagaraj.
Click to expand...


also avoid splitting those planes under high speed signals
if it necessary use stitching capacitors i.e: capacitor linking the two splitted planes under the signal

Mahmoud
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top