Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

why analog filters are not FIR?

Status
Not open for further replies.
W

wajahat

Advanced Member level 4
Full Member level 1
Joined
Feb 3, 2006
Messages
102
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Activity points
2,097
One difference between analog and digital filter is that digital filter can be FIR.WHY CAN'T an analog filter be FIR?
Any response would be of great help.
 

Analog filters have response that is a ratio of polynomials. The Laplace transform of these have decaying exponentially which mathematically never reach zero.
 

    W

    wajahat

    Points: 2
    Helpful Answer Positive Rating
flatulent "Analog filters have response that is a ratio of polynomials. The Laplace transform of these have decaying exponentially which mathematically never reach zero."
Thanks flatulent.
Is there any physical reasoning also?
 

Physiclally, you can think that an input impulse will charge up the capacitors. These will discharge through any resistors. The voltage will decline but the current will also so the decline will become smaller and smaller as time goes on but never reach zero.
 

    W

    wajahat

    Points: 2
    Helpful Answer Positive Rating
Mainly, analog filter is designed by op-amp with feedback circuit. Any feedback circuit has transfer function

H(s)= A(s) / 1+B.A(s)

the transfer function is a ratio of two polinomials thats form a IIR filter not FIR
 

    W

    wajahat

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top