Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to convert lib file to db file?

Status
Not open for further replies.
V

vahid_roostaie

Newbie level 5
Newbie level 5
Joined
Sep 30, 2005
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,384
I want to construct db file from lib file. is there any special command or special method for this?
 

how to convert .lib to .db

Hi vahid_roostaie,

if u want to convert the lib to db. u need to have librarie compiler if u need the functionality. other wise if u need the db for the link processs like rams then u can obtain db using the design-compiler also.

read_db library.lib
list_libs
write_lib -macroname -formate db -o library.db

will give u the db in the design-compiler.
regards
rameshs
 
convert .lib to .db

read_db cannot read lib file, it can only read db format to read lib file you have use read_lib

read_db library.lib
list_libs
write_lib -macroname -formate db -o library.db
Click to expand...
 

converting .db to .lib

Hi,

just try this in library compiler,

read_lib x.lib
write_lib -format db x

then u can have x.db file in u r directory where u have executed the above commands. Hope this helps u.
 
read lib file

Just cross check that library name for reading and writting should be same.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top