Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HOW TO DEFINE SHORT CUT KEYS IN ALLEGRO

Status
Not open for further replies.
V

v_kumar

Full Member level 5
Full Member level 5
Joined
Jun 2, 2004
Messages
272
Helped
18
Reputation
36
Reaction score
3
Trophy points
1,298
Location
India
Activity points
1,964
HELP

CAN ANYONE TELL ME HOW TO DEFINE THE SHORT CUT KEYS IN ALLEGRO.

THANKS
 

hi

check for pcbenv directory and file env
edit env file and do the following
eg;
alias F4 "delete"
alias p "place manual refdes"
alias ~L "redisplay"
# ~ for control
or
open allegor pcb editor
on allegro command line do the follwing
alias p "place manual refdes"

--TuX
 

how to remove the assigned keys

and how to assign for swaping layers top and bottom.
the option for it is present while routing right click-->swap layers
 

delete the env file present inside the pcbebv folder. This remoes all customer settings and retains allegro default.

On keyboard use + and - sign (present at the right side of the keyboard along with numbers) for changing the layers.

Good Luck!
Nagaraj.
 

    V

    v_kumar

    Points: 2
    Helpful Answer Positive Rating
thanks dear tux;
but i try that u called but i dont fine any change Plz againe and give more details in the process.

Best Regards
 

Hi Antonios

can u explain me what u did.. so that i can try to help you out..

--TuX
 

Hi tux
i need HOW TO DEFINE THE SHORT CUT KEYS IN ALLEGRO
i need to press short cut key insted of select the command from menu
as Zoom fit F9
Zoom in F10
and so on i need to make my short cut key.
 

i am giving the format try this

if u want m letter for move then

u have type like this funckey m move



STATEMENT is funckey (ur shortcut letter) (and the instruction u want)

ex:- funckey m move

ranga

Added after 1 minutes:

for removing this shortcuts if u reopen the file u will lost all of the shortcuts
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top