Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB AVR programmer, WINXP based

Status
Not open for further replies.
W

wakaka

Full Member level 4
Full Member level 4
Joined
Dec 7, 2005
Messages
237
Helped
10
Reputation
20
Reaction score
6
Trophy points
1,298
Activity points
2,931
usb avr programmer

Hi all, any recommends on this programmer? i would like to biuld one. Plz provide info along with the software and firmware, thanks
 

avr programer

help plz....usb programmer....window base, not linux or Unix...plz....
 

usb asp avr stk500

er...i know the usbasp, the software needed to downlaod the hex file is avrdude rite? but isn't avrdude is run on Unix? any software on windows?
 

avr-doper

There exists many of AVR programmers....

but I think STK500 compatible usb programmer is good for you....
Because you don't woory about the windows driver and application.....
But This is more complex schematic.. :D

one of the STK500 compatible AVR programmer site....

**broken link removed**
 
Last edited by a moderator:

usb avr

wakaka said:
help plz....usb programmer....window base, not linux or Unix...plz....
Click to expand...
Compatible to Atmel's STK500 with built-in USB to Serial converter.
**broken link removed**
 
Last edited by a moderator:

best avr programer software

here are some programmers
**broken link removed**

Bibin John
**broken link removed**
 
Last edited by a moderator:

avr doper on vista

cristianp said:
The programmer from https://www.fischl.de/usbasp/ have an application and drivers for Windows. Look into the archive...
Click to expand...

I dl this file, there are several files like firmware, software.....is there any software other than avrdude than is compatible with this programmer??Something like IDE?

Or can someone tell me how to run it from scratch, coz i not quite understand on downloading hex file into a microC using this USB programmer. thankx
 
Last edited by a moderator:

stk500 compatible

can anyone teach me how to use this avrdude for windows provided by h**p://www.fischl.de/usbasp/
?

after downloading extracting it, cant find any exe file to be installed, or just start typing commands in the command prompt?? any examples? thankx
 

free usb avr programmer

This one is based on same idea as the usbasp
but it's stk500 compatible.

**broken link removed**

/Bingo
 
Last edited by a moderator:

avr usb programmer

any one have a windows software for these programmer? (not command prompt)
 

burn o mat no usb

hi, there is avrdudegui which is graphical interface for avrdude.
i can not remember url but see attachement
cancel
 

stk500 usb avr programmer

wakaka said:
Hi all, any recommends on this programmer? i would like to biuld one. Plz provide info along with the software and firmware, thanks
Click to expand...

GTP-USB. You can find it in the Internet (by Gooogle etc.) It's software-WinPic800.
 

stk500 usb

Use avr doper programmer whic is free source and compatible with stk500.
 

usb based programmer software

hey there are lot of these programmers as you can see above.. but i would ask you to try out atleast 3 of them and see which is best for what kind of code size... you might observe something very interesting!!
 

avr doper linux alatt

Try the AVR Burn O Mat GUI. It is the best.
**broken link removed**

**broken link removed**
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top