Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can't run Cadence Leapfrog after successful setup

Status
Not open for further replies.
aomeen

aomeen

Member level 4
Member level 4
Joined
Dec 8, 2005
Messages
78
Helped
24
Reputation
48
Reaction score
7
Trophy points
1,288
Location
Egypt
Activity points
1,836
Hello All,

I want to use leapfrog software "VHDL simulator within cadence" , I ran the setup and it quoted "setup is completed succesifully", but I cant run the tool, there are no .bin file to point to,

I believe leapfrog must be lunched as standalone "not under icfb"

Does anyone know which Env variables to define or which lines to add in .cshrc file ??

Thx in advance
 

leapfrog cadence

You should have a digital simulator (eg Logic Design and Verification version 5 from cadence?) if you want to run vhdl or verilog. The Cadence IC 5xx do not have digital simulator!
 

Re: Cadence Leapfrog

Right, But under icfb there are option to import VHDL files, from the ic manager choose File --> Import --> VHDL ,

So how come I can import a file and cant simulate it ??
 

Re: Cadence Leapfrog

aomeen said:
Right, But under icfb there are option to import VHDL files, from the ic manager choose File --> Import --> VHDL ,

So how come I can import a file and cant simulate it ??
Click to expand...

This option and other (eg AMS option) are just an programming interface between Cadence IC package and other periphery softwares. So long as you have the executables and the licenses will you be able to use the option you want.

Leapfrog is not being supported by Cadence now. You can use this piece only if yo are still in IC 4xx.
 

    aomeen

    aomeen

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top