Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is the difference between primitive and unit cell?

Status
Not open for further replies.

sheraz.pervaiz

Member level 4
Member level 4
Joined
Feb 15, 2006
Messages
69
Helped
6
Reputation
12
Reaction score
1
Trophy points
1,288
Activity points
1,870
What is the difference b/w primitive and unit cell?
And what are the primitive and unit cell of diamond,BCC and FCC lattice?
 

bcc primitive cell

What i have in my exercise book :|

Unit cell (UC): (elementary cell :?: )
You can assembly from them the crystal. It is defined with elementary translation vectors.
Basic property of the lattice is periodical repetition of the translation vectors.

Primitive cell (PC):
Unit cell with the lowest bulk. It contains only one lattice point.

look at this links, so you can imagine lattice structure:
https://en.wikipedia.org/wiki/Cubic_(crystal_system)
https://en.wikipedia.org/wiki/Diamond

diamond structure is two cells with FCC lattice, where one is moved (1/3 of body diagonal) in the orientation of body diagonal. (see attached picture) :D

properties:

=====SC=====
bulk of UC: a³
bulk of PC: a³
number of lattice points in UC: 8×1/8

=====BCC=====
bulk of UC: a³
bulk of PC: a³/2
number of lattice points in UC: 8×1/8+1=2

=====FCC=====
bulk of UC: a³
bulk of PC: a³/4
number of lattice points in UC: 8×1/8+3=4

=====DIAMOND=====
bulk of UC: a³
bulk of PC: a³/4
number of lattice points in UC: (8×1/8+3)*2=8 :?: number of 8 is correct, but i don't remember how can you get it

please correct me if i made mistakes somewhere ..
 

primitive unit cell

The crystal structure of a material is often discussed in terms of its unit cell. The unit cell is a spatial arrangement of atoms which is tiled in three-dimensional space to describe the crystal. The unit cell is given by its lattice parameters, the length of the cell edges and the angles between them, while the positions of the atoms inside the unit cell are described by the set of atomic positions (xi,yi,zi) measured from a lattice point.

For each crystal structure there is a conventional unit cell, which is the smallest unit that has the full symmetry of the crystal (see below). However, the conventional unit cell is not always the smallest possible choice. A primitive unit cell of a particular crystal structure is the smallest possible unit cell one can construct such that, when tiled, it completely fills space. This primitive unit cell does not, however, display all the symmetries inherent in the crystal. A Wigner-Seitz cell is a particular kind of primitive cell which has the same symmetry as the lattice.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top