Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to design 3V DC supply from 24VDC?

Status
Not open for further replies.

sraiderk

Member level 1
Member level 1
Joined
Mar 9, 2005
Messages
39
Helped
11
Reputation
22
Reaction score
1
Trophy points
1,288
Activity points
1,591
How can dizayn the 3VDC staible voltage source from 24VDC, Current consuption will be max 100mA from 3VDC side
 

Re: 3V DC supply

Because of voltage difference between input and output (24V-3V=21V), linear regulators may generate to much heat, although, if you are not concerned about it use LM317 with a heatsink and you are done ..
However, switching regulators may be better option, and there are planty of them on the market ..
For example: LM2594N-ADJ, LM2671M-ADJ ( **broken link removed** ) ..
Also, try MAXIM-IC web site at:
**broken link removed**

Regards,
IanP
 

    sraiderk

    Points: 2
    Helpful Answer Positive Rating
3V DC supply

You can use any linear regulator if power efficiency is not a concern.Otherwise go for switching regulators.
 

    sraiderk

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top