Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What are PLCs and DMSs?

Status
Not open for further replies.

A.Anand Srinivasan

Advanced Member level 5
Advanced Member level 5
Joined
Oct 15, 2005
Messages
1,792
Helped
257
Reputation
514
Reaction score
39
Trophy points
1,328
Location
India
Activity points
10,678
i went to a company internship and i found that they used something like PLC, DMS etc..... can someone explain what these are
 

Re: PLC

Hi,
I have done a very brief project on PLC. The attached file contains something useful about PLC. Certainly, more can be found from the links inside the attached file~~
Best regards,
john
 
Re: PLC

progrmable logic controller..
a controller that could control a certain equipments....
such as a factory, its just like a box with lot of swiches.......
 

PLC

do you have any basic Programmable logic controller materials ? I really want to learn more about this
thanks a lot
 

Re: PLC

hard copy.....:|
lots of handouts hir ..in this forum...
try seach some...
 

PLC

yeah, u'r rite, a bulk of related topics in the past, thanks a lot
 

PLC

Digital Multiplex System (DMS) is the name shared among several different telephony product lines from Nortel Networks for wireline and wireless operators. Among them are the DMS-1 Rural/Urban digital loop carrier, DMS-10 telephone switch, the DMS SuperNode family of telephone switches (DMS-100, DMS-200, DMS-250, DMS-300, DMS-500, DMS-GSP, DMS-MSC, DMS-MTX), and the S/DMS optical transmission system.

Exploratory development on the technology began in 1971. The first toll switch entered service in 1976 and the first Class 5 switch began service in 1979. DMS was the first commercially successful digital switch and revolutionized the industry. Previously technology entered the telecom industry only slowly with the telephone companies amortizing equipment over periods as long as forty years. AT&T was intending to delay the introduction of digital switching until the 1990s. The success of DMS changed the industry by creating a technological imperative that has lasted until this day. DMS, with its massive introduction of digital technology, was in no small way one of the antecedents that created the necessary conditions for the Internet.

The DMS name arose from a designation for a switching matrix design that was developed in the exploratory phase of the project. The Digital Multiplexed Switch was selected as the basic switching design for the project. The product was intended as a successor for Nortel's first electronic switch the SP1 and was to be called the SP2. However the DMS acronym was mellifluous and was eventually (1975) adopted as the designation for the DMS-100 family of products with the 'S' standing for 'system' rather than 'switch.' It was then applied to the entire digital switching family. Dave Hood was the designer who first coined the term DMS.

DMS is favoured by many European cable operators as the switching platform for their voice networks. The DMS-10 is widely used by rural wireline providers as well as the US Military. DMS-100 and 200 switches are widely deployed throughout the U.S. by RBOC and independent telcos. The DMS-250 is the backbone of the long distance network and the DMS-500 is commonly deployed by CLECs because it combines DMS-100 and 250 capabilities.


A programmable logic controller, PLC, or programmable controller is a small computer used for automation of real-world processes, such as control of machinery on factory assembly lines. The PLC usually uses a microprocessor. The program can often control complex sequencing and is often written by engineers. The program is stored in battery-backed memory and/or EEPROMs.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top