Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need multiplier function for Spartan 2E

Status
Not open for further replies.
E

EDA_hg81

Advanced Member level 2
Advanced Member level 2
Joined
Nov 25, 2005
Messages
507
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
4,808
How I can realize multiplier function for Spartan 2e.

The timing constrain for this function is 14.7ns.

Thank you.
 

Use the CoreGen application in ISE to create a multiplier, then drop it into your code as a "black box" component.
 

    E

    EDA_hg81

    Points: 2
    Helpful Answer Positive Rating
On page 11 of the document : **broken link removed** you'll find a nice multiplication example, which may be used for your own design. It is aimed at Virtex devices, but uses the same MULT_AND gates available in Spartan-2e devices. Unfortunately Spartan-2e hasn't got any dedicated multiplier blocks, so multiplication must be done "in a discrete way".
If your design is for school than this is the way to go, else if you need a functional multiplier unit for your own purposes, I suggest using the CoreGen solution as suggested above. It can generate quite good piece of hardware for you.

regards, yego
 

    E

    EDA_hg81

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top