Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What does Balun mean and why we use it ??

Status
Not open for further replies.
Re: what's Balun ??

balun is a differential to single ended conversion circuit

khouly
 
Re: what's Balun ??

Hope these are helpful.
 
Re: what's Balun ??

ahmad_abdulghany said:
I want to know simply, what does Balun mean? and why we use it?
also Sleeve antenna???
:?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?::?:

Thanks in advance,
Ahamd,
Click to expand...
 

what's Balun ??

very good article about balun.
 

Re: what's Balun ??

want to know simply, what does Balun mean? and why we use it?
also Sleeve antenna???
Click to expand...

Let me try:

The word balun means balanced-unbalanced: it's used to adapt a balanced device to an unbalanced one; in a balanced device (as larger type of antennas) we have on both terminal the same voltage respect to the ground (if not so it's an unbalanced device); a dipole with direct feed is balanced, a coaxial cable is unbalanced. Why balun is used/ You can read further at: https://www.qsl.net/iz7ath/web/02_brew/11_balun/pag01_eng.htm

And if you want to build a balun then read its use and hows at: https://www.hamuniverse.com/balun.html
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top