Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with using EDK 6.3i and ISE8.1i

Status
Not open for further replies.
sawaak

sawaak

Full Member level 2
Full Member level 2
Joined
May 20, 2003
Messages
146
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
1,069
Hi,
i had installed ISE6.3i and EDK6.3i previously and both are running fine, now i installed ISE8.1i(in a different drive), ISE 6.3i runs fine, but my EDK6.3i doesnt start, when i start EDK, it gives the error "$Xilinx variable doesnt point to campatible version of ISE"(something like that), i checked it and found that $Xilinx points to 8.1i installation, i added the path to 6.3i installation but now the error is "the procedure entry point ?.......... could not be located in the dynamic link library libPortability.dll"
how to solve that :(

thanks
sawaak
 

edk 6.3i

i guess u should have only one version either 6.1 or 8.1....why have both when it gives errors
 

EDK 6.3i and ISE8.1i

I installed both ise7.1.4 (edk 7.1 with sp2) and ise 8.1 too .but my edk7.1 works fine.
you just need to charge your environment variable to d:\xilinx71 (my ise71 installed in this directory) when you want to use ise 7 or edk7 and change it back to d:\xilinx81(my ise8.1 installed in this directory) when another
 

    sawaak

    sawaak

    Points: 2
    Helpful Answer Positive Rating
EDK 6.3i and ISE8.1i

You should use the same version ise and edk.
 

Re: EDK 6.3i and ISE8.1i

Hi,
thanks Matrix_YL, your suggestion solves the problem, i made a mistake by APPENDING the ISE6.3i path with the ISE8.1i path, now i removed the ISE8.1i path and my EDK starts working. :)

thanks
sawaak
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top