Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with a project on MSP430 as a controller

Status
Not open for further replies.
D

dika

Member level 4
Member level 4
Joined
May 3, 2006
Messages
72
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,897
actual hardware (device_unknown) do not match

greetings
i'm a newbie
i've got this project in college, it requires me to use MSP430 as the controller but the project theme is free. the problem is i don't know anything about it.
what i'm trying to ask is what do i need to start and where can i get it. is it possible to get the software required for the development for free, cause i'm kinda tight budgeted.
thanks in advance
 

iar unknown exception in driver

Assembler is for free.
See TI site for development tools and software. There you also can find code samples and etc.
 

actual handware (device_unknown) do not match

can u please show me the url?
i seem to have lost in the site...
what can i get from it? i've the mspgcc compiler but i don't know how to use it
 

need help on MSP430

thanks movingbait
 

Re: need help on MSP430

i have problem with the IAR embedded workbench and TI MSP-FET430PIF FET emulator. i'm trying to debug my code but the IAR keep showing me this message :

FATAL ERROR
unknown exception in driver (#SD1)

session aborted!
Click to expand...

can anybody help me please??

thanks
 

Re: need help on MSP430

FATAL ERROR
unknown exception in driver (#SD1)

session aborted!
Click to expand...

i've skipped the problem above... maybe... it got something to do with the project option or something. i've tried to create a new project and it worked just fine.

but the problem didn't stop there... a warning box showed up...

Chosen derivative (MSP430F147) and actual hardware (Device_unknown) do not match.
Click to expand...

that is weird, because the uC i used is the MSP430F147 and every JTAG connection between FET and my device is correct. and the IAR setting was set according to the TI FET guide.
if i force to OK, IAR will report

FATAL ERROR
Failed to write memory at 0x8000

Session aborted!
Click to expand...

i presume it was related with the Device_unknown report.

can anybody please help me.....
i'll click helped me button if anybody can.

thanks
 

need help on MSP430

i think you have someting wrong in your jtag port
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top