Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Developing HDL on a PIC card with FPGA

Status
Not open for further replies.
gliss

gliss

Advanced Member level 2
Advanced Member level 2
Joined
Apr 22, 2005
Messages
691
Helped
75
Reputation
150
Reaction score
16
Trophy points
1,298
Activity points
5,892
Has anyone ever developed HDL on a PCI card with an FPGA? Also have you worked the Windows or Linux driver to get the card to work with a system?
Thanks
 

Re: FPGA PCI development

Thanks but the problem with this one is the driver and application are windows only and closed source.
 

Re: FPGA PCI development

I have developed PCI controller earlier and also used one from opencores!!
but somebody in our company developed the driver for linux!

so, what is the problem you are facing?
 

FPGA PCI development

I have ever wrote a PCI target core, use verilog HDL. I use DriverStudio to develop windows driver.
 

    gliss

    gliss

    Points: 2
    Helpful Answer Positive Rating
Re: FPGA PCI development

duoduo, can you show me some details on your design? Do you have a website?
According to the Compuware website, the DriverStudio product has been discontinued.

Added after 2 minutes:

it_boy said:
I have developed PCI controller earlier and also used one from opencores!!
but somebody in our company developed the driver for linux!

so, what is the problem you are facing?
Click to expand...
I haven't started yet, I was just wondering how difficult developing the driver and core would be for Linux.
How much code is there just to get data transfer into and out of the PCI device?
 

FPGA PCI development

I have design a PCI card which can work with Intel 845 chip mainboard, and i write the driver with Driver Studio 3.2.
By the way, Do the pci core from opencores can work perfectly?
 

FPGA PCI development

I assume they have been verified.
 

Re: FPGA PCI development

hi,
- ace make pc 3000 pci on xilinx spartan XC2S100 PQ208.
- on this board is also xc9572xl and PROm xc17S150ACP.
- all is working recovery HDD.
 

FPGA PCI development

PCI.ppt
**broken link removed**
**broken link removed**
 

FPGA PCI development

i have made a card used acex1k100 and plx9054.it works well.
 

Re: FPGA PCI development

Hi, I am a New member to this forum.
I had written few Kernel modules on 2.2 Linux kernel for PCI core testing (long time back), The company I worked for had developed the PCI core. I am no longer in Linux field but can help, let me know if you need help on Kernel modules.
- Vignesh
 

FPGA PCI development

Two years ago I developed a PCI board and solved the driver problem by using WinDriver from Jungo (check www.jungo.com).

It took me about ten minutes to get it working.
 

Re: FPGA PCI development

Is there any one used the pci for ATA(PATA or SATA) interface?
 

Re: FPGA PCI development

i should say fpga likes the high level language, asic likes assemble language,
correct me if i am wrong.
 

Re: FPGA PCI development

hi i need some good projects for exercise purpose
regards
mallik
 

Re: FPGA PCI development

heloo
do u hav pci code in verilo/vhdl..
can u mail it to me on swappy.best@gmail.com,.
or anything thing which you hav related to pci bridge....
its an my acadamic project
 

Re: FPGA PCI development

I have designed a PCI slave, which work with a power-PC.

But I didn't implemented the "retry" function.
 

Re: FPGA PCI development

hi !
i need the project doucumentation and specification of PCI...not from opencores.org plzzzzzzzzzz

thanks
deepu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top