Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How is this TOI output solved graphically ?

Status
Not open for further replies.
S

STOIKOV

Full Member level 4
Full Member level 4
Joined
Nov 18, 2005
Messages
236
Helped
8
Reputation
16
Reaction score
2
Trophy points
1,298
Activity points
3,083
graphical solution

how is solved TOIoutput graphically ? Read that intermodulation products rise 3 times faster than IF tones (so slopes rate is 3) but do not have clear why TOIoutput=1.5*m1-0.5*m2
 

Re: graphical solution

it's only a simple solution of linier equation

for 1st line which slope =1
YTO1 - m1 = XTO1 - X1

for 2nd line which slope = 3

YTO1 - m2 = 3 (XTO1 - X1)

where (XTO1, YTO1) is the intersection point of 1st and 2nd line.

from those two equations, an elimination can be done.
YTO1 -m1 = (YTO1-m2)/3
2/3*YTO1 = m1 - 1/3*m2

YTO1 = 3/2*m1 - 1/2*m2

hopefully it helps

regards
 

    S

    STOIKOV

    Points: 2
    Helpful Answer Positive Rating
Re: graphical solution

thanks masadi, your process to get TIOoutput is clear. This equation is in function of m1 and m2, I tried to obtain TOIinput also in function of m1 and m2 (without involving other variables) but cannot get it so far :|. Can help with it ?
Regards,
 

Re: graphical solution

well, found in books that TOIinput=½(m1-m2)+PIN
also assuming that slopes ratio is 1:3 (see figure)
but wonder if can be obtained only in function of m1 and m2.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top