Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Motor controller Uc3625

Status
Not open for further replies.
B

Beffo

Junior Member level 2
Junior Member level 2
Joined
Feb 21, 2006
Messages
22
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,493
uc3625

I'm trying to construct a bldc motor controller using Texas UC3625 (same as 1625 and 2625). It has all the nice features I want so I tried to use the circuit in the datasheet.

But it does not work... the three high side MOSFET's seems to work but not the lower ones...

The MOSFET bridge DOES work as it's supposed to... made another controller first using TB9060FNG succesfully. Have just switched the controller IC and the components around it. Bridge and bridge driver remains...

Suggestions???

Added after 2 hours 46 minutes:

Datasheet:
https://www.alldatasheet.com/datasheet-pdf/pdf/29341/TI/UC3625.html
 

uc3625 pdf

Use the Application exampel in data sheet and modify to your application... and it works fine.

Great controller that's easy to use
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top