Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to fix duplicate part name

Status
Not open for further replies.
neena

neena

Member level 4
Member level 4
Joined
Feb 6, 2006
Messages
77
Helped
9
Reputation
18
Reaction score
4
Trophy points
1,288
Location
pluto
Activity points
1,762
hi all

i am facing a problem in concept HDL
when i export the schematic to layout
an error is accurig
The error message is duplicate part name found on line 2
how ro fix this problem

:(
regards
--
 

neena said:
hi all

i am facing a problem in concept HDL
when i export the schematic to layout
an error is accurig
The error message is duplicate part name found on line 2
how ro fix this problem

:(
regards
--
Click to expand...

I think you have to go to that line, and revise it, you may wrote something twice,and it should be written once,

or attach your code, someone may debug it

Regards,
ahmad,
 

hi,
normally this error occurs due to duplicate part referances
that is if there is referance U1 and agin it is present for some other part
than this error occurs u have to check the schematic for part referances.
 

    neena

    neena

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top