Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

change the text editor in cadence ic !!

Status
Not open for further replies.

ramy_maia

Member level 2
Member level 2
Joined
Dec 9, 2005
Messages
46
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,663
cadence default text editor

i am useing cadence IC 5.141 on Suse 10
i tried to change the editor by be gedit or kwrite instead of the defult editor vi
but when i try open any cell view (eg.verilogA) i get this error
/usr/local/cdstree/tools/lib/libgcc_s.so.1: version `GCC_3.3' not found (required by /usr/lib/libstdc++.so.6)

i tried it with gedit ,kwrite, kate , judit all give the same error
any ideas?!
thanx in advance
 

cadence text editor

I don't know about Suse, but for RedHat and LineOX I added into .cdsinit file

editor="/path_to_editor"

and everything works.
I use "nedit"
 
  • Like
Reactions: darsen

    ramy_maia

    Points: 2
    Helpful Answer Positive Rating

    darsen

    Points: 2
    Helpful Answer Positive Rating
change editor cadence

I think u have to install a package called gcc or gcc_3.3 as written and i think u can find it on the SUSE installation CDs,anyway i am not sure at all but i faced a problem like this before and it worked when i installed the package
 

    ramy_maia

    Points: 2
    Helpful Answer Positive Rating
cadence editor

Fom said:
I don't know about Suse, but for RedHat and LineOX I added into .cdsinit file
editor="/path_to_editor"
and everything works.
I use "nedit"

this is what i did and still have the error

Fom said:
install a package called gcc or gcc_3.3
it is installed !!
 

cadence change default editor

Suse 10 comes with GCC 4. Are you sure the 3.3 compatible libraries are installed?
 

change editor in cadence

gliss said:
Suse 10 comes with GCC 4. Are you sure the 3.3 compatible libraries are installed?

where to get such libraries i searched google but i got nothing
 

cadence text editor

ramy_maia said:
i am useing cadence IC 5.141 on Suse 10
i tried to change the editor by be gedit or kwrite instead of the defult editor vi
but when i try open any cell view (eg.verilogA) i get this error
/usr/local/cdstree/tools/lib/libgcc_s.so.1: version `GCC_3.3' not found (required by /usr/lib/libstdc++.so.6)

i tried it with gedit ,kwrite, kate , judit all give the same error
any ideas?!
thanx in advance

I am not sure if there is gedit in suse kde, but you can try xedit as your default cadence ic editor.
 

text editor change cadence

The way that you are trying is correct. To change the editor, just type in the command interpreter (or put in the .cdsinit) the line:

editor = "path_to_editor"

The error that you reported occurs because, to setup the cadence environment, the library paths and binaries paths are changed, and with this new path, probably the editor does not work. The error reports the library /usr/local/cdstree/tools/lib/libgcc_s.so.1 (this is not the path of the system libraries ;-) )

Did you tried to launch the editor (kwrite) from the terminal after the setup of cadence? Maybe the same error will occur...

Tip: Try one that works :)
Tip (now serious): correct the library path order to get both working, editors and cadence, or prepend in the command a library path that works for you:
editor = "LD_LIBRARY_PATH=/lib:/usr/lib <path to editor>"

Ps.: The post that I am answering is very old, but maybe could be useful for somebody...
 
  • Like
Reactions: jwfan

    jwfan

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top