Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

The difference between ultrasim and nonosim

Status
Not open for further replies.

asueee0

Advanced Member level 4
Full Member level 1
Joined
Dec 26, 2005
Messages
109
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,299
ultrasim and nonosim.

ultrasim and nonosim, what is the difference,and what are they good for, and what is connection between them and Hspice, spectra?
 

Re: ultrasim and nonosim.

asueee0 said:
ultrasim and nonosim, what is the difference,and what are they good for, and what is connection between them and Hspice, spectra?

Both are used to simulate big circuits with more than 1000 elements. They divide the circuit matriz into small ones to achieve high speed. The circuit could use partition, ie different precision in different parts of the total circuit. Hspice uses only one big matriz to solve the circuit, so that it takes more time to simulate large circuits.

Bastos
 

    asueee0

    Points: 2
    Helpful Answer Positive Rating
ultrasim and nonosim.

then hoy about hsim, what is it for?
 

Re: ultrasim and nonosim.

asueee0 said:
then hoy about hsim, what is it for?

It's also a top simulator of the same type as nanosim. It has the same applications. For me it is the best of them.

Bastos
 

    asueee0

    Points: 2
    Helpful Answer Positive Rating
Re: ultrasim and nonosim.

Hie,

As bastos saib both simulators referred before i.e. hsim, nanosim and ultrasim are top level simulators ususly used for circuits with more than 10000 elements this to take a real advantage of is usage.

The big difference between them is:

Hsim ---> The most fast and accurate for digital and analog designs.
Nanosim ---> More fast than Ultrasim and in certain situations can be more acurate
than nanosim.
Ultrasim ---> Is the most slow and the worst interms of accuracy for analog design
meanwhile for digital desgin where the accuracy for now is not so much
important is also very good

Hope this helps

amendes
 

    asueee0

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top