Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Information on transformer that changes unbalanced video

Status
Not open for further replies.
D

DrWhoF

Advanced Member level 1
Advanced Member level 1
Joined
May 6, 2005
Messages
402
Helped
24
Reputation
48
Reaction score
11
Trophy points
1,298
Activity points
4,388
video and twisted pair

To transmit video over twisted pair I need a transformer which will change 75Ω unbalanced video to balanced signal.
Anyone has information about video transformer: materials (ferrite type) and winding diagram.
 

Re: video and twisted pair

The easiest way to transform signal from unbalanced 75Ω to balanced 100Ω (UTP) is to implement "balun" configuration .. see picture below ..
To cover the whole video band (20Hz-6MHz) the most suitable core will be RM type ..

Alternatively you can get pre-wind video baluns from:
**broken link removed**
.. and I think this will be cheaper option than to try to get cores, experiment with number of turns , .. etc. etc.

Regards,
IanP
 

    D

    DrWhoF

    Points: 2
    Helpful Answer Positive Rating
Re: video and twisted pair

Thanks a lot.
I need to connect 2 twisted pairs so as you suggested I will buy 4 video baluns.
 

Re: video and twisted pair

use MAXIM IC
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top