Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What code should be used for 8 bit current mode DAC?

Status
Not open for further replies.
W

wany

Member level 2
Member level 2
Joined
Oct 18, 2004
Messages
48
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
377
About current mode DAC

i will do a 8bit curren mode DAC. what kind of code should i use. is it binary or thermometer. Thank you !
 

Re: About current mode DAC

It depends on your spec. The differences between two are mainly:

Binary code: Smaller area(no decoder and few switches), worse DNL, same INL.

Thermometer/Unit-element code: More area(needs decoder and much more switches), better DNL, same INL.

As a tradeoff, most people use a mixture of both. MSB bits are in thermometer code, LSB bits are in Binary code.

I read a very good paper about this topic before, it is a reference in Berkeley's EE247 ADC class. Highly recommend!!!
 

    W

    wany

    Points: 2
    Helpful Answer Positive Rating
About current mode DAC

Binary
 

    W

    wany

    Points: 2
    Helpful Answer Positive Rating
Re: About current mode DAC

thank you jlee and omis .But omis why do you affirm to use binary? The sample rate of the DAC is 100MHz.
 

Re: About current mode DAC

segmentation may be better.™
 

About current mode DAC

generally speaking, thermometer code is used when bit<=8bit while segmentation is used when bit >8bit
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top