Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

8870 DTMF decoder Problem!

Status
Not open for further replies.
UroBoros

UroBoros

Advanced Member level 2
Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
Activity points
6,463
8870 dtmf decoder

Hai

I am using 8870to decode a DTMF tone from a telephone line.


But the decoder always out a different value.

for 2 it outs 3
for 4 it outs 5


That means the LSB of the data line always come as 1.

I checked the line for any short or anything like that.

Any idea?

Anything to do with gain of 8870 that it outs error values?

I tries 270k and 470k as feed back resistor.No change?

suggessions please

picstudent
 

8870 dtmf

HI HAVE WORKED ON THIS DTMF DECODER LONG BACK.DIDNOT GET ANY SUCH ERROR EVER. BUT I REMEMBER THERE IS A PIN IN THIS CHI WHICH BECOMES HIGH WHEN EVER ANY DTMF SIGNAL OF ANY VALUE IS RECEIVED. I THINK U MUST BE TAKINHG IT AS UR LOWEST BIT. CHECK THE PIN DETAILS.

IF U STILL DONT GET LET ME KNOW
I WILL FIND OUT
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
dtmf 8870

Can you show us the schematic?

ps. What did you use for Ringing, Hook up etc. from the line?
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
decoder 8870

Hai

Schematic is not in softcopy now.Only in paper.

Now no ring detection is wired.

I have just connected the Delayed steering output pin (of 8870)to a input pin of MCU and polls it for a signal.

When that pin shows a high I am enabling the out enable pin of 8870 and reads the port.

regarding the DTMF 8870 schematic , it is the one showed in their datasheet.

thanks
picstudent
 

holtek 8870

Check if you have left any unused pins floating
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
pins of dtmf decoder 8870

Hai

Thanks all.


The DTMF decoder CA8870 was faulty.replaced it and all ok.

Actually I didint suspect such a possibilty.

That chip was 3 years "old" in my junk box. It was working then .(3 years before).

Thanks to all

picstudent
 

ht9170 bug

DTMF DECODER ... safe and low cost ( verified ) from HOLTEK HT9170
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top