Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

want to start learning analogue IC design

Status
Not open for further replies.

nathan80

Member level 3
Member level 3
Joined
Feb 23, 2006
Messages
61
Helped
6
Reputation
12
Reaction score
2
Trophy points
1,288
Location
Malaysia
Activity points
1,882
i have just joined a newly established ic design house as a test engineer to test their analogue ic designs. i have seen the designers work and am interested in learning analogue ic design.
my designers here are very young and unable to privide me with a proper learning guide. i have downloaded behzad's razali's book on ic design and been told to start with cmos technology.
i am wondering what freeware softwares are the best to be used to start learning and if anyone can provide me with a better guideline.
hope some one can spend about 5 minutes typing down, his or her professional advice for a new grad in the field of electronics like me.
 

I think u should start with circuit analysis then mos.
Sedra smith is really good for analog design for beginners.
then u can go to razavi, grey and meyar.
It gives the basic ingredients necesarry for analog design
All the best
 
  • Like
Reactions: folser

    nathan80

    Points: 2
    Helpful Answer Positive Rating

    folser

    Points: 2
    Helpful Answer Positive Rating
ic50---tools
book---cmos analog circuit design
 

nathan80 said:
i have just joined a newly established ic design house as a test engineer to test their analogue ic designs. i have seen the designers work and am interested in learning analogue ic design.
my designers here are very young and unable to privide me with a proper learning guide. i have downloaded behzad's razali's book on ic design and been told to start with cmos technology.
i am wondering what freeware softwares are the best to be used to start learning and if anyone can provide me with a better guideline.
hope some one can spend about 5 minutes typing down, his or her professional advice for a new grad in the field of electronics like me.


Hi,
As for software, U can download Simetrix simulator if u want to build some basic blocks to get a feel of analog design. The demo version of the simulator is available for free on the net.
 

Pspice is good

Added after 2 minutes:

For the books, I'd rather start with Sedra/Smith, then go on to Gray/Meyer. Razavi's one is good for CMOS design.
 

floatice said:
simulation tool:hspice

hspice is not freeware software.................
 

U CAN USE THE DEMO VERSION OF TANNER FOR THE LEARNING PROCESS WHICH U CAN DOWNLOAD FROM THEIR WEBSITE ITSELF. www.tannereda.com

Added after 2 minutes:

pspice is a very good tool
 

    nathan80

    Points: 2
    Helpful Answer Positive Rating
learning in this society on more time
 

Get started with Analog Design by Behzad Razavi and Sedra & Smith. Keep following this forum in the Analog Circuit Design, Analog IC Design & Layout which you will learn many things on IC design from the beginners until the experienced people. Good Luck.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top