Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why the MOS technologies are called 0.5µm and 1.5µm respectively ?

Status
Not open for further replies.
S

STOIKOV

Full Member level 4
Full Member level 4
Joined
Nov 18, 2005
Messages
236
Helped
8
Reputation
16
Reaction score
2
Trophy points
1,298
Activity points
3,083
When using Mosis AMIS 0.5µm Techology :
λ value is 0.3µm,
minimun gate length is 2λ=0.6µm

When using Mosis AMIS 1.5 Technology :
λ value is 0.6µm,
minimun gate length is 2λ=1.2µm

So, why the technologies are called 0.5µm and 1.5µm respectively ?
 

Re: MOS Technologies

as for as i studied in bachelor degree...the FEATURE SIZE defines the technology...so the mentioned values mut be FEATURE SIZE..
sorry, that i don't remember exact definition of FEATURE SIZE!!

Regards
 

    S

    STOIKOV

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top