Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

resonant frequency of Mushroom structure EBG?

Status
Not open for further replies.
J

jayleung

Member level 5
Member level 5
Joined
Nov 29, 2005
Messages
82
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Activity points
1,962
Hi, everyone. I have a question about the metal EBG (mushroom-like) structure's resonant frequency.

What kind of capacitance and inductance determine the 0-reflection frequency and stop-band frequency? Sheet capactance or individual capactance in D. Sievenpiper paer?

And are the resonant frequency determined by L & C the same as 0-reflection phase frequency and stop-band frequency?

Thanks.
 

hello,

What kind of capacitance and inductance determine the 0-reflection frequency and stop-band frequency? Sheet capactance or individual capactance in D. Sievenpiper paer?
the capacitance between 2 neighbor cells, i.e. the small gap between them.

And are the resonant frequency determined by L & C the same as 0-reflection phase frequency and stop-band frequency?
yes, they should be the same. small deviation is possible because of approximations in analytic model used for determination of L and C.

bye
 

    J

    jayleung

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top