Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What's the cheapest AVR JTAG ICE?

Status
Not open for further replies.
UroBoros

UroBoros

Advanced Member level 2
Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
www.uroborostech.in
Activity points
6,463
Hai

Which is the least expensive AVR JTAG ICE available as far as you know?




I am not interested in building one.At least before I have a working one with me.

thanks

please

picstudent
 

avr jtag ice

hai

Thanks for the link.

This is a serially interfaced JTAG.

Is their any substantial inconvenience or reduction in any type of speed or anything assocoaited with a JTAG interfaced through serial port other than a USB JTAG?

Which one you will suggest for me?

Difference in cost is around 10$.

Your opinion please

picstudent
 

avr jtag ice mkii clone

hi .. i am using serial avr jtag ice from **broken link removed** via usb/serial adaptor without any problem. This device works also as isp.

regards

cancel
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
jtag ice mkii cn

Picstudent said:
Is their any substantial inconvenience or reduction in any type of speed or anything assocoaited with a JTAG interfaced through serial port other than a USB JTAG?
Click to expand...

AVR JTAG interfaced through serial port works just fine.
The USB variant was developed mainly due to legacy PC COM port.
There is no penalty regarding speed using AVR JTAG interfaced through serial COM port. Or at least I didn't noticed.
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
avr jtag isp v3.0b

Not much devices are supported by ICE.And no support will be implemented for newer avr's. Visit atmel page for device list.
If you plan to work with newer avr's - buy usb based ICE II . It supports debugwire as well (one wire debugging for tiny models )
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
jtag ice mk2 schematic

JTAG MKII that is introduced by atmel have to mega128 cpu and one dual port RAM,uses PDIUSBD12 as usb chip.(I saw mine).

But there is no sch available.Nothing about it is available!
 

    UroBoros

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
avr jtag ice clone

I looking for JTAG MKII Schematics too.
It's difficult to find some information.
Can anyone help ???
 

Re: Cheap AVR JTAG ICE?

I found one use as a ATMEGA128 Development Board and AVR JTAG ICE.
**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top