Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to control a printer using MCU?

Status
Not open for further replies.
E

excellent

Newbie level 1
Newbie level 1
Joined
Sep 1, 2005
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
hI;

I need to conrtroller a printer through a microcontroller.
Well, I don't know how !. What I know is that the printer should be colored. I will later integrate it to a machine. and I think I will use a PIC, since I know how to program one.

Can any one suggest a good printer with a nice documentation. And a nice summary of what should I do to finish this 'imposssible mission'.

Any help is so appreciated.
 

Re: printer to MCU

The PICs no have POWER to drive the printer for own.
The PICs can get SERIAL COMM and then carry to Parallel PRINTER PORT
The PICs can get Parallel PORT and then carry to SERIAL COMM or any.

The PICs can emulate any controller for jog the printer.


Tell me what you have like input device for drive the printer and what you like to do with this .
 

    E

    excellent

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top