Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for a 12V to 20V DC-DC Converter

Status
Not open for further replies.
W

Willem

Member level 2
Member level 2
Joined
May 17, 2005
Messages
43
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,726
Hi there

I want to design and build a DCtoDC converter to boost 12V to about 20V. I am a bit rusty with my basic electronics, could anyone help or suggest a circuit. Also, it would be great if the output is slightly variable.

Is there a IC that i can use or a circuit floating around somewhere? The output need not be 100% stable. I want to stay away from coml;icated circuits, a basic one will more than do.

Any help would be greatly appreciated.

Willem
 

12v to 20v dc dc converter

hi
inaddition to the above you can check the ti and onsemiconductor boost converteres
www.ti.com
www.onsemi.com

if you want to design your own boost conveter download the following book from eda books forum
first course in power electronics and motor drive by ned mohan

bset regards
 

dc-dc 12vdc to 20vdc

here is a link for you regarding boost topology. hope it will help.

http://www.hardware-guru.com/Interview%5CBoost_converter.pdf#search='boost%20converter'
 

dc dc converter 12v datasheet

Hi,

Maybe this will work if the current is high enough. It is possible to add a regulator to the output if the voltage is too high.
 
conversor 12vdc/20vdc

i don't understand what you really ask.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top