Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

fringe capacitance calculation

Status
Not open for further replies.
fringing capacitance

Do not use adjacent metal layers and keep distance between wires especially differential ones.
 
fringe capacitance formula

can u plz tell me what is Fringe Capacitance
 

fringing capacitance calculation

Is there any material about fringe capacitance?
Anybody can upload lt?
thanks!
 

fringing capacitance formula

Fringe capacitance means the capacitance from the side wall of a material to any other object around it

To minimize it, only way is to put object far apart from each other
 

fringe capacitance

Also make your caps have a high ratio of area to perimeter.
 

what is fringe capacitance

lladnar23 said:
Also make your caps have a high ratio of area to perimeter.
Click to expand...

yes, larger unit area minimizes fringe capacitance.
 

fringing cap

but larger unit area increases also unit perimeter!!!
moreover, larger unit area increases the total area of your circiut!!!

for me, the better solution is to use metal of different layer to route the circuit.
 

fringe cap

fly6987 said:
but larger unit area increases also unit perimeter!!!
moreover, larger unit area increases the total area of your circiut!!!

for me, the better solution is to use metal of different layer to route the circuit.
Click to expand...

consider having a square with an area of 4square unit.
i think the perimeter of it is lesser than the total perimeter of 4 squares having 1 square unit each. that is what i mean.
 

capacitance fringe

lladnar23 said:
Also make your caps have a high ratio of area to perimeter.
Click to expand...

I think this is to minimize the uncertainty of the cap absolute value !
 

calulating capacitor fringing

quaternion said:
lladnar23 said:
Also make your caps have a high ratio of area to perimeter.
Click to expand...

I think this is to minimize the uncertainty of the cap absolute value !
Click to expand...

yes you are right. and that uncertainty is due to the effect of the fringe capacitance.
nowadays, there is formula for getting the actual value of the capacitor and fringe capacitance is already included in the calculation.
 

fringe capacitance model

No - the reason to maximize the perimeter has to do with the fact that fringing capacitance is proportional to perimeter of the cap. When we model a parallel plate cap, we disregard the fringing capacitance and say that all of the capacitance is due to the area. We can't make this assumption when there is a large perimeter.
Look up Hajimiri & Lee's paper of lateral flux capacitors (fractal capacitors) for more information.
As far as mismatch / uncertainty goes, Pelgram shows that the variance of capacitance is inversely proportional to cap area.
 

capacitance calculation fringe

Fringe capacitance depends on the layer. For metals, upper layers are thiker and so there is more fringe capacitance between two upper metal layers with the same kind.
 

calcuration fringe capacitance

It may help you to understand more on Fringe Cap quantitively
 

I found this which might be useful

Section 3.3 talks about Fringe Caps.

Dave C
 

Attachments

  • Capacitance_Calcs.pdf
    682.7 KB · Views: 398
  • Like
Reactions: jjr and mvj

    M

    mvj

    Points: 2
    Helpful Answer Positive Rating
    J

    jjr

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top