Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

stability analysis for opamps....spectre automation

Status
Not open for further replies.
N

nijMcnij

Full Member level 1
Full Member level 1
Joined
Dec 6, 2005
Messages
97
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,288
Activity points
2,167
spectre stability analysis

hello all,

i am designing a new opamp, and would like to siye the miller caps quickly and easily....:)

is there a nice way to tell spectre after running a parametric analysis using the capacitance value as a variable , to calculate the phase margin(using the special fundtion that is) for each run once the analysis is concluded.

many thanks
 

spectre stb analysis

When your parametric simulation is finished plot the Gain-Phase curves. You'll have one curve for each value of the cap.
Select the phase curves with the "familly" function of the calculator, and use the
phaseMargin function to get thePM. When printing the result you should have a table of the PM versus the cap.

If you want to know more about opamp design with Cadence you can read the following tutorial. There are some scripts samples at the end for automation.
Good luck
 
  • Like
Reactions: lamoun

    N

    nijMcnij

    Points: 2
    Helpful Answer Positive Rating
    L

    lamoun

    Points: 2
    Helpful Answer Positive Rating
spectre tutorial

thanks skal81
 

stb analysis spectre

Dear skal81:

DO u have another cadencefinction of spectre tutorial ? Or whuch web can we find these doc ?

Many thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top