Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

desired output in the adaptive filter application

Status
Not open for further replies.
O

otaghizadehm

Newbie level 3
Newbie level 3
Joined
Dec 6, 2005
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
if we realy have the desired output in the adaptive filter applications we dont actually need any filter or system because we already have the desired output.
 

as an example, imagine a time-varying comm. channel, first in a small time u send the known data and reciever will calculate the coefficients for its equalizer according to the desired output that transmitter already has sent. and then it will use the adapted equalizer to equalize the channel for the unknown recieved signal.
so u have used the desired output to specify the adaptive equalizer coefficients and after that to equalize the channel with unknown output.
and so on for adaptive signal processing and adaptive noise cancellation and...
take a look at an "adaptive filters " book like that of Haykin.
cheers
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top