Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

"Analog" RAM and D-FilpFlop?

Status
Not open for further replies.

davyzhu

Advanced Member level 1
Advanced Member level 1
Joined
May 23, 2004
Messages
494
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,298
Location
oriental
Activity points
4,436
Hi all,

We know that digital circuit use RAM and D-FF to store digital signal values. Is there any "Analog" RAM and D-FF which can store analog signal values?

I am curious to know if not, how to store analog signal values in analog way?

Any suggestions will be appreciated!
Best regards,
Davy
 

You can store a current in an inductor (magnetic field), or a voltage in a capacitor (electric field). A charge-coupled device (CCD) stores an array of analog voltages in an array of capacitors. DRAM and some ROMs use capacitors too, and some of them recognize mutiple voltage levels as distinct bits. A magnetic tape recorder ... well, you get the idea!
 

    davyzhu

    Points: 2
    Helpful Answer Positive Rating
Hello Davyzhu,
Nice question. I think there is no device that can store an analog signal in analog way. Because when we try to store an analog value say for example voltage, we are trying to store the charges that are impressed on that voltage. There is no other way to do that except using capacitors. There is no pefect capacitor! charges have always have a way to leak making it impossible to contain them.
 

    davyzhu

    Points: 2
    Helpful Answer Positive Rating
Keep in mind that in many applications a capacitor is used to store an analog voltage for short periods of time (ex. peak detector, track and hold for ADC, etc).

It may be possible to build a circuit to hold an analog voltage for a while using a capacitor, but you would have many problems b/c you would have charge and discharge cycles on the capacitor and every error on a charge/discharge cycle would be cummulative and eventually, the capacitor would be discharged or charged to the supply voltage.

If a device exists, it would be interesting indeed.
 

    davyzhu

    Points: 2
    Helpful Answer Positive Rating
Search for "charge coupled devices" or CCDs.

EDIT: I missed seeing this mentioned in echo47's post. He also mentioned magnetic tape storage, as in audio and video tapes.
 

    davyzhu

    Points: 2
    Helpful Answer Positive Rating
I think there is no device that can store an analog signal in analog way.
 

    davyzhu

    Points: 2
    Helpful Answer Positive Rating
There is no problem storing an analog signal in an analog format, all the above methods work just fine. They also decay over time. Modern ADC and DAC methods are so advanced though that it makes no difference. Using enough bits can in some cases give you more discrete levels than some older analog formats, and they do not decay over time.
 

    davyzhu

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top