Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to avoid mobile and radio speaker noise interference?

Status
Not open for further replies.
R

rami.masadeh

Member level 1
Member level 1
Joined
Oct 26, 2005
Messages
40
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,626
mobile phone radiation

dears:
when you have a mobile call and your mobile near to the radio speaker this will cause a noise voice, who can we avoid this voice??????
 

Re: mobile phone radiation

The quality of the audio device can avoid such kind of noise.
That noise is generate because the RF power is detected somewhere inside the audio amplifier. As the audio ampli is better "shielded" as the detected noise is attenuated.
Modern car radio/CD are less insensitive to cell-phone
 
  • Like
Reactions: blooz

    R

    rami.masadeh

    Points: 2
    Helpful Answer Positive Rating
    blooz

    blooz

    Points: 2
    Helpful Answer Positive Rating
mobile phone radiation

also depends of the filter inside front-end radio of your radio device
 

mobile phone radiation

If you are about speaker - better to experiment with small size ceramic capasitors 68 - 200 pf in parallel to radio speaker output wires. Also good to add normal or common mode choke filter with ferrite core to the same place . But this is valid for case if mobile signal enters radio through speaker wires. But if it is not the case , it is needed to find a holes in radio EMC design - whther power lines others unproper shielding.
 
  • Like
Reactions: blooz

    blooz

    blooz

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top