Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how can i add a test pad in the ADC circuit?

Status
Not open for further replies.
T

tuza2000

Full Member level 2
Full Member level 2
Joined
Nov 12, 2004
Messages
141
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Activity points
1,079
i have finish a ADC layout,and i want to add a test pad in the layout,i dont know is it necessary add a buffer between the test point and the pad?
and if need,how ?

thanks
 

Hi,

Just connect your test pad to the the node you want to probe. Don't connect your circuit node through the test pad.

Franck.
 

    T

    tuza2000

    Points: 2
    Helpful Answer Positive Rating
i dont know if the test point can drive the pad?
is it necessary add four inverter ?
thx
 

yes, if the test point can not drive the pad, you should add the buffer.
 

    T

    tuza2000

    Points: 2
    Helpful Answer Positive Rating
i have add four inverter between the test point and pad,now i am doing postsimulate,it is so slow.
can anyone tell me how to postsimulate using nanosim?
 

Hi, tuza2000,
Nanosim is a high-precision transistor level simulation tool, so it is slow. Why not try Hspice?
If test pad needs to drive large capacitor or low value resistor load, buffer is needed.

Bg,

tuza2000 said:
i have add four inverter between the test point and pad,now i am doing postsimulate,it is so slow.
can anyone tell me how to postsimulate using nanosim?
Click to expand...
 

    T

    tuza2000

    Points: 2
    Helpful Answer Positive Rating
nanosim has different level accuracy,you can config it to save time

regards
 

    T

    tuza2000

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top