Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

where to find some process parameters?

Status
Not open for further replies.
S

samuel

Full Member level 3
Full Member level 3
Joined
Nov 15, 2004
Messages
171
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Location
world
Activity points
1,143
such as λn and λp of channel length modulation for NMOS and PMOS ;

such as Kn and Kp of intrinsic transconductance for NMOS and PMOS;

thanks.

sm.
 

λ is for design rules, you can get it defenitely from www.mosis.org

K is transconductance depend on process

MAybe u can try this :

**broken link removed**
 

I mean, λn and λp are for channel length modulation, not for design rules.

K, is transconductance dependent on your own process.

but i dont know to measure them.
 

the model file you can find the value
 

How to calculate the channel length modulation parameter when doing spice simulation . I can not find any useful equation to calculate their values. Can someone knows ?
 

As Sunking said, these are model parameters, you can try to get them in model. The equation? there are many analog design books which supplies it, you should take some time to find it.

Bg,
 

Hi,

Check the attachment for the measurement of lambda .

Regards,
Suria3
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top