Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Chips in LCD module ODM 16216

Status
Not open for further replies.
S

sandeepa

Newbie level 3
Newbie level 3
Joined
May 7, 2005
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
Hello

Has anyone used the LCD module ODM 12216 from Oriole?What chipset is it based on?I cant find its manual giving timing details and commands anywhere.

**broken link removed**
This is the only information on the companys website regarding this module.

There are 2 chips on the back and one of them has
SEC c8048
KS0066F00.

Any idea what these numbers mean?Googling for these doesnt come up with anything useful.

Thanks.
 

oriole,lcd data sheet

The KS0066 / KS0066U is software compatible to the industry standard HD44780 controller. So you have a very standard LC module.

The only thing that is a little bit different is the fact that the backlight uses only one pin (hence 15 pins, instead of the more common 16). But that should not cause any trouble.

General character LC module info:
**broken link removed**

KS0066U controller datasheet:
http://www.hantronix.com/down/ks0066u.pdf
 

    S

    sandeepa

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top