Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to get access to SOIC chip pins without PCB tooling machine?

Status
Not open for further replies.
A

archiees

Member level 1
Member level 1
Joined
Jul 22, 2005
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,695
I am doing a small diff amp project where i bought CA3127 which has matched npns. Now i realized that they are in 16 ld SOIC form. I do simple breadboard prototyoes in my lab. I don't have access to any pcb tooling machine.
Can anyone suggest me some sort of zig which i can make in lab which gives me easy access to the tiny pins of the chip. Please see attaced datasheet.
 

productinfo.dll

adapter boards for SOIC chips qre quite common, you only have to solder the chip on the board and you can get the pins on the header connectors...
Regards..
 

    A

    archiees

    Points: 2
    Helpful Answer Positive Rating
soic chips

Thanks Mr_Programmer,
Can you suggest me where i can buy them. I searched through digikey and was not successfull.
thanks once again.
 

soic breadboard

I recommend A726-ND from DigiKey. **broken link removed**
 

    A

    archiees

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top