Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help me in 1st time to deal with any microcontroller

Status
Not open for further replies.
N

NoHa111

Junior Member level 3
Junior Member level 3
Joined
Sep 2, 2005
Messages
25
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,515
Hello,
it is my first time to deal with microcontrollers
i found this website and that made me happy but i felt i am just a kid that don't know nothing.
anyway, i use the microchip pic16f627 and i gonna make a small project
i use mplab v7.01
i don't know how to use an LCD with my project which is a simple calculator and when i will go and buy an LCD will i just say a wanna an LCD or what??
and i also wanna u to help me in the c code as i wanna make my calculator contains M+ and M- and i don't know how?
i also wanna ask if i wanna make more than 1 interrupt in each i need a diffrent process to be executed.how can i do that??
 

That's a complicated project to start with. You may want to write a few programs just writing messages to an LCD or detecting which button was pressed to begin with. Then you can move on to the math, etc. I suggest checking out www.piclist.com

Yes, you will ask for a "LCD module."

Interrupts will jump to vector 0x0004. There you will check for the possible interrupts that got you to 0x0004. It's kind of like an if-elseif-else-endif block. If you're using assembly you can use conditional jumps (btfss, btfsc) to build the if-endif block.
 

    N

    NoHa111

    Points: 2
    Helpful Answer Positive Rating

    N

    NoHa111

    Points: 2
    Helpful Answer Positive Rating
i m assuming u understand 'c' very well, go and download proteus lite in case if u dont have, http://www.proteuslite.com/

go to HELP > Smaple Designs >Contents > Microprocessor simulation design > PIC samples > PIC16 Calculator with IAR C

open it and u will find a PIC16F876 calculator with alphanumaric LCD and in the folder u will find source code written in C, u can hav an idea abt PIC calculator from there

regards
 

    N

    NoHa111

    Points: 2
    Helpful Answer Positive Rating
The most simplest is try to flash a LED. If you can't do that, think no further.
 

hill said:
The most simplest is try to flash a LED. If you can't do that, think no further.
Click to expand...

for sure i know how...
it just confusing me the use of LCD as i haven't tried it before
honestly,i didn't study microcontrollers in my college yet....you can just say i prepare myself and challenging for understanding the basics bymyself and this small project allows me to go further when summer vacation ends


thanks alot jonw0224,bbarney&ful babu for ur help
 

if u are dealling ist time with the mcs u must study the the microcontroller 8051 by I SCOT MACKANZIE
u will find every solution of ur problem
opr visit site www.8052.com/tutotrials
 

    N

    NoHa111

    Points: 2
    Helpful Answer Positive Rating

i think if you start in mc take steps to be profesional in it.so if you real beginner you can follow this steps to be good one
1- flash led
2-one push button to drive a led
2-tow push button to select between tow led
3-you can use 7-seigment in your project
4-write hello world in an lcd
5-make matrix key board to disply the numbers
6-now you are ready to make your project[/u]

Added after 54 minutes:


if you have any problem or you can not make matrix keyboard you can mail me and with my pleasure i will do my best
 

    N

    NoHa111

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top