Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

the rampup time setting in powerup simulation

Status
Not open for further replies.
J

John Xu

Member level 3
Member level 3
Joined
Jul 22, 2005
Messages
59
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,938
powerup simulation

Hi,
I want to do the powerup analysis for my simulation. What value I should select for the rammpup time of power supply?

Can anyone help me?

Thanks in advance
John
 

You should try different ramp up time, i.e. 10us, 1ms, 100ms
 

    J

    John Xu

    Points: 2
    Helpful Answer Positive Rating
Thanks for the reply!

I would like also to know what is the max typ, min rampup time for powerup in normal?

Thanks
 

In some ATX power system, the power up time is in ms level , but in portable system or bettery power,the power up time maybe faster.

you can check your application circuit. and decide the simulation condition.
 

    J

    John Xu

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top